FRP/GRP Fiberglass e ntšitsoe Round Solid Rod

Pultruded fiberglass Rod ke thepa e kopantsoeng e entsoeng ka resin ea polyester le fiberglass roving.E hlahisoa ka mokhoa oa pultrusion, o lumellang hore o thehoe hoo e batlang e le sebōpeho leha e le sefe.Sena se etsa hore e be thepa e fapaneng haholo, e loketseng mefuta e mengata ea likopo.E fumaneha ka limaraka tse 'maloa tse tloaelehileng, tse nang le thepa e ngata, kapa e ka etsoa ka tloaelo ho fihlela litlhoko tse itseng.

Motsoako oa resin ea polyester le fiberglass roving e fana ka molamu oa fiberglass oa pultruded.E matla ebile e tšoarella nako e telele, leha ho le joalo e bobebe, 'me e na le khanyetso e ntle ea kutu, e etsa hore e be e loketseng lits'ebetso tsa kantle.E boetse e na le thepa e ntle ea ho kenya motlakase, e etsang hore e tšoanelehe bakeng sa lisebelisoa tsa motlakase.Hape ha e na conductive ebile e thibela lelakabe, e leng se etsang hore e be khetho e ntle bakeng sa lits'ebetso tsa bohlokoa tsa polokeho.

Ho fumana lintlha tse ling, tlanya ho tab ya data ya sehlahiswa ka hodimo.

iteanye le rona

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

FRP/GRP Fiberglass e ntšitsoe Round Solid Rod

Mefuta ea Fiberglass Angle Molds:

SerialeLintho	C=Ø (mm)	Boima ba 'mele	Lintho tsa serial	C=Ø (mm)	Boima ba 'mele	Lintho tsa serial	C=Ø (mm)	Boima ba 'mele
1	Ø3.0	14g	12	Ø10	155g	23	Ø20	610g
2	Ø4.0	26g	13	Ø11	176g	24	Ø21	640g
3	Ø4.52	32g	14	Ø12	226g	25	Ø22	731g
4	Ø5.0	40g	15	Ø12.7	234g	26	Ø23.5	802g
5	Ø6.0	56g	16	Ø14	292g	27	Ø25	950g
6	Ø6.35	57g	17	Ø15	340g	28	Ø30	1410g
7	Ø7.0	71g	18	Ø16	380g	29	Ø32	1452g
8	Ø8.0	93g	19	Ø16.3	396g
9	Ø8.5	105g	20	Ø17	454g
10	Ø9.0	127g	21	Ø18	492g
11	Ø9.5	134g	22	Ø19	510g

Sinogrates@GFRP PULTUSION:

•Boemo bo tlase

•Elasticity e phahameng

•Sterilizer

•Koho

•Ho tenyetseha

•Ponahalo e ntle

• Litšenyehelo tse tlase tsa tlhokomelo

• insulation

•Theko e tlase

• Tšireletso ea UV

Sinogrates ke moetsi ea ka sehloohong oa lithupa tsa fiberglass pultrusion bakeng sa liindasteri le lits'ebetso tse fapaneng.Lihlahisoa tsa rona li etselitsoe ho khotsofatsa litekanyetso tse phahameng ka ho fetisisa tsa boleng le ts'ebetso, ho netefatsa hore u fumana liphello tse ntle ka ho fetisisa ho tsoa mererong ea hau.Melamu ea rona ea pultruded e sebelisoa nthong e 'ngoe le e' ngoe ho tloha ho thepa ea lipapali ho ea ho oli le khase, kahoo ho sa tsotellehe hore na litlhoko tsa hau ke life, Sinogrates e na le tharollo.

Lithupa tsa rona tse entsoeng ka lehloa li sebelisitsoe mefuteng e fapaneng ea ts'ebeliso, ho tloha ho li-spacers tsa mofuta o omileng le lipalo tsa lehloa ho isa lithupeng tsa lifolakha le matšoao a jarete.Re boetse re hlahisitse li-axle, li-gripper rods, li-axles, lipalo tsa lisebelisoa, lipalo tsa mebaraka, lifolakha tsa kolofo, li-motor wedges, li-awning stiffeners, li-oil field sucker rods, lisebelisoa tsa lipapali, lipalo tsa litente, li-stiffeners tsa terata le li-insulators.

Joalo ka Sinogrates, re utloisisa bohlokoa ba ho fana ka lihlahisoa tsa boleng bo holimo tse tla mamella liteko tsa nako.Ke ka lebaka leo re nkang tlhokomelo e eketsehileng ho netefatsa hore lithupa tsa rona tsa pultrud li etsoa ka mokhoa o phahameng ka ho fetisisa, e le hore u ka ba le tšepo mosebetsing oa hau.

Ho sa tsotelehe hore na litlhoko tsa hau ke life, Sinogrates e na le melamu e phethahetseng bakeng sa hau.Ka lihlahisoa tsa rona tsa boleng le sehlopha se nang le phihlelo, u ka kholiseha hore morero oa hau o tla phethoa ka liphello tse ntle ka ho fetisisa.Ikopanye le rona kajeno ho ithuta haholoanyane ka lithupa tsa rona tsa pultruded le hore na re ka u thusa joang ka projeke ea hau e latelang.

Laeborari ea tlhahlobo ea bokhoni ba lihlahisoa:

Lisebelisoa tse hlokolosi tsa liteko tsa li-profiles tsa FRP le li-gratings tse entsoeng ka Fiberglass, joalo ka liteko tsa flexural, liteko tsa tensile, liteko tsa khatello le liteko tse senyang.Ho latela litlhoko tsa bareki, re tla etsa liteko tsa litšoantšiso le bokhoni ho lihlahisoa tsa FRP, re boloka lirekoto ho netefatsa botsitso ba boleng ba nako e telele.Re ka etsa bonnete ba hore boleng bo ka khotsofatsa litlhoko tsa bareki ka mokhoa o tsitsitseng ho qoba mathata a sa hlokahaleng ka mor'a thekiso.修正

FRP Pultruded Grating Retardant / Chemical Resistant

Likhetho tsa FRP Resins Systems:

Phenolic resin (Mofuta oa P): Khetho e ntle ka ho fetisisa bakeng sa lits'ebetso tse hlokang ho tima mollo o mongata le mosi o fokolang joalo ka libaka tsa ho hloekisa oli, lifeme tsa tšepe le li-pier decks.
Vinyl Ester (Mofuta V): emelana le tikoloho e thata ea lik'hemik'hale e sebelisoang bakeng sa lik'hemik'hale, kalafo ea litšila, le limela tse fumanehang.
Isophthalic resin (Mofuta oa I): Khetho e ntle bakeng sa lits'ebetso moo ho phatloha ha lik'hemik'hale le ho qhalana ho etsahalang hangata.
Mokhahlelo oa Lijo Isophthalic resin (Mofuta oa F): E loketse lifeme tsa indasteri ea lijo le lino tse pepesehileng tikolohong e hloekileng e tiileng.
Morero o Akaretsang Orthothphalic resin (Mofuta O): mekhoa e meng ea moruo ho lihlahisoa tsa vinyl ester le isophthalic resin.

Epoxy Resin(Mofuta E):fana ka thepa e phahameng haholo ea mechine le ho hanyetsa mokhathala, ho nka melemo ea li-resin tse ling.Litšenyehelo tsa hlobo li tšoana le PE le VE, empa litšenyehelo tsa thepa li holimo.

Tataiso ea likhetho tsa li-resin:

Mofuta oa Resin	Khetho ea Resin	Thepa	Khanyetso ea lik'hemik'hale	Se thibelang Mollo(ASTM E84)	Lihlahisoa	Mebala e Bespoke	Boholo ℃ Mocheso
Mofuta oa P	Phenolic	Mosi o Tlaase le Ho hanyetsa Mollo ho Phahameng	Hantle haholo	Sehlopha sa 1, 5 kapa ka tlase	E bōpehile 'me E ntšitsoe	Mebala e Bespoke	150 ℃
Mofuta oa V	Vinyl Ester	Khanyetso e Phahameng ea Corrosion le e thibelang Mollo	E kgabane	Sehlopha sa 1, 25 kapa ka tlase ho moo	E bōpehile 'me E ntšitsoe	Mebala e Bespoke	95℃
Mofuta oa I	Polyester ea isophthalic	Indasteri Grade Corrosion Resistance le Fire Retardant	Hantle haholo	Sehlopha sa 1, 25 kapa ka tlase ho moo	E bōpehile 'me E ntšitsoe	Mebala e Bespoke	85℃
Mofuta O	Ortho	Ho hanyetsa ha Corrosion e Itekanetse le ho Thibela Mollo	Tloaelehileng	Sehlopha sa 1, 25 kapa ka tlase ho moo	E bōpehile 'me E ntšitsoe	Mebala e Bespoke	85℃
Mofuta oa F	Polyester ea isophthalic	Lijo Grade Corrosion Resistance le Fire Retardant	Hantle haholo	Sehlopha sa 2, 75 kapa ka tlase ho moo	Bopiloe	Brown	85℃
Mofuta oa E	Epoxy	E babatsehang ho thibela kutu le ho thibela mollo	E kgabane	Sehlopha sa 1, 25 kapa ka tlase ho moo	Pultruded	Mebala e Bespoke	180 ℃