English
  • Segondè fòs FRP/GRP MINI MESH MOLDED GREY

Segondè fòs FRP/GRP MINI MESH MOLDED GREY

Griyaj moule SINOGRATES@Min-mesh se yon altènatif ekselan pou pyeton ki fèmen ki bezwen koule lè san twou twòp.Pousantaj louvri nan griyaj la min-may moule se sèlman 1/9 konpare ak nòmal 38mm griyaj bòdi kare.Pousantaj ki pi piti a louvri ka evite atik ki pi wo a 10mm tonbe.akoz twou samaller, griyaj moule min-mesh konfòm ak estanda ADA ak DDA pou chèz woulant, epi "15mm steel ball experience" min - griyaj moule may aplike nan yon gwo kantite waf, machin pou leve bato ak pil, ak pisin. ak lòt zòn amizman piblik.

Pou plis enfòmasyon, klike sou onglet done pwodwi anlè a.

Pwodwi detay

Tags pwodwi

FRP/GRP KARTZ REZISANTE KI PLAT KOUVRI FIBRE VERRE GREYO MOULE
FRP/GRP KARTZ REZISANTE KI PLAT KOUVRI FIBRE VERRE GREYO MOULE
FRP/GRP KARTZ REZISANTE KI PLAT KOUVRI FIBRE VERRE GREYO MOULE
FRP/GRP KARTZ REZISANTE KI PLAT KOUVRI FIBRE VERRE GREYO MOULE
FRP/GRP KARTZ REZISANTE KI PLAT KOUVRI FIBRE VERRE GREYO MOULE
(Mini) H38mm 6.5/5.0 19*19 /38*38 1220*3660/1220*2440/1000*2000/1000*3000/1220*4038 23.5 30
(Mini)H25mm 6.5/5.0 20*20/40*40 1247*4047/1007*4047/1247*3007/1207*3007/1007*3007/1007*2007 16.9 42
(Mini)H40mm 7.0/5.0 20*20/40*40 1247*4047/1007*4047/1247*3007/1207*3007/1007*3007/1007*2007 23.8 42
H50mm 8.0/6.0 50*50 1220*3660/1220*2440/1000*2000/1000*3000 24 78
H50mm 7.2/5.0 50*50 1220*3600/1220*2440/1000*4000/1000*3000 21 78
 
Epesè(mm) Bar thckness(Anlè/Anba) Gwosè may (mm) Gwosè panèl ki disponib (mm) Pwa(kg/m²) Pousantaj Louvri(%)
H13mm 6.0/5.0 38*38 1220*3660/1220*4000/1220*2440/1000*3000 6.0 78
H14mm 6.0/5.0 38*38 1220*3660/1220*4000/1220*2440/1000*3000 6.5 78
H15mm 6.0/5.0 38*38 1220*3660/1220*4000/1220*2440/1000*3000 7.0 78
H20mm 6.0/5.0 38*38 1220*3660/1220*2440/1000*2000/1000*3000/1220*4038 10 65
H 25mm 6.5/5.0 38*38 1220*3660/1220*2440/1000*2000/1000*3000/1220*4038 12.5 68
H 30mm 6.5/5.0 38*38 1220*3660/1220*2440/1000*2000/1000*3000/1220*4038 14.8 68
H38mm 7.0/5.0 38*38 1220*3660/1220*2440/1000*2000/1000*3000/1000*4038/1220*4000/1220*4920 19.5 68
H25mm 6.5/5.0 40*40 1007*3007/1247*4047/1007*4047/1007*2007/1207*3007 12.5 67
H40mm 7.0/5.0 40*40 1007*3007/1247*4047/1007*4047/1007*2007/1207*3007 19.8 67
H50mm 7.0/5.0 40*40 1007*3007/1247*4047/1007*4047/1007*2007/1207*3007 25.0 58
(Mini) H25mm 6.5/5.0 19*19/38*38 1220*3660/1220*2440/1000*2000/1000*3000/1220*4038 16.9 30
(Mini) H30mm 6.5/5.0 19*19/38*38 1220*3660/1220*2440/1000*2000/1000*3000/1220*4038 19 30

Pati mwazi egzibisyon, tanpri mande nou.

Sinogrates@FRP moule griyaj:

•Limyè

•Izolasyon

•Rezistans chimik

•Ignifuge dife

•Sifas anti-glise

• Pratik pou enstalasyon

•Low pri antretyen

•UV pwoteksyon

•Doub fòs

 

Griyaj SINOGRATES@FRP se yon konpoze men ki gen résine enstore ak roving kontinyèl vèr ki byen mouye epi trikote atravè yon mwazi louvri. Griyaj FRP nou an konpoze de 30% -35% fib vè ak 40% résine enstore, pandan se tan. ,Blokaj ignifuge dife (ASTM-E84) ak bloke pwoteksyon UV yo pral ajoute nan materyèl melanje pandan fabrikasyon.

G9
G1

Moule Fiberglass GRP Top chwa:

Sifas kwasan an tèt yo: pa gen okenn sab kwatz sou sifas konkav oswa semi-linè, ki bay ekselan efè anti-glise nan anviwònman mouye, labou oswa lwil, epi li se yon kalite griyaj anti-glise souvan.

 

Sifas kwatz sab yo: tap mete grenn sab kwatz sou sifas tèt griyaj FRP, sab kwatz solidifye ak kouvri sou sifas anwo yo, sa ki ka bay yon ekselan efè anti-glise.

FRP Pultruded griyaj ignifuge dife / rezistan chimik
FRP Pultruded griyaj ignifuge dife / rezistan chimik
FRP Pultruded griyaj ignifuge dife / rezistan chimik
FRP Pultruded griyaj ignifuge dife / rezistan chimik

Chwa sistèm rezin FRP:

Rezin fenolik (Tip P): Chwa ki pi bon pou aplikasyon ki mande maksimòm ignifuge ak emisyon lafimen ki ba tankou raffineries lwil oliv, faktori asye, ak pil waf.
Vinyl Ester (Tip V): kenbe tèt ak anviwònman chimik strik yo itilize pou pwodui chimik, tretman dechè, ak plant fondri.
Rezin izoftalik (Tip I): Yon bèl chwa pou aplikasyon pou kote pwodui chimik pwojeksyon ak debòdman se yon ensidan komen.
Rezin izoftalik klas manje (Tip F): Ideyalman apwopriye pou faktori endistri manje ak bwason ki ekspoze a anviwònman pwòp strik.
Objektif jeneral résine òtofalik (Tip O): altènativ ekonomik vinyl ester ak rezin izoftalik pwodwi yo.

Epoksidik résine (Tip E):ofri pwopriyete mekanik trè wo ak rezistans fatig, pran avantaj ki genyen nan lòt rezin.Depans mwazi yo sanble ak PE ak VE, men pri materyèl yo pi wo.

FRP Pultruded griyaj ignifuge dife / rezistan chimik

laboratwa tès kapasite pwodwi yo:

Ekipman eksperimantal metikuleu pou pwofil FRP pultruded ak griyaj FRP moule, tankou tès flexural, tès tensile, tès konpresyon, ak tès destriktif.Dapre kondisyon kliyan yo, nou pral fè tès pèfòmans & kapasite sou pwodwi FRP, kenbe dosye yo pou garanti estabilite bon jan kalite pou alontèm.Nou ka asire ke bon jan kalite a ka satisfè kondisyon kliyan yo estab pou evite pwoblèm apre-lavant nesesè.

FRP Pultruded griyaj ignifuge dife / rezistan chimik
FRP Pultruded griyaj ignifuge dife / rezistan chimik
FRP Pultruded griyaj ignifuge dife / rezistan chimik

Gid opsyon rezin:

Kalite résine Opsyon résine Pwopriyete Rezistans chimik Ignifuge dife (ASTM E84) Pwodwi yo Koulè Sur Max ℃ Tanperati
Kalite P Fenolik Ba lafimen ak siperyè rezistans dife Trè byen Klas 1, 5 oswa mwens Moule ak Pultruded Koulè Sur 150℃
Kalite V Vinyl Ester Siperyè rezistans korozyon ak ignifuge dife Ekselan Klas 1, 25 oswa mwens Moule ak Pultruded Koulè Sur 95℃
Kalite I Polyester izoftalik Endistriyèl Klas Kowozyon Rezistans ak Ignifuge dife Trè byen Klas 1, 25 oswa mwens Moule ak Pultruded Koulè Sur 85℃
Kalite O Ortho Modere rezistans korozyon ak ignifuge dife Nòmal Klas 1, 25 oswa mwens Moule ak Pultruded Koulè Sur 85℃
Kalite F Polyester izoftalik Rezistans Kowozyon Klas Manje ak Ignifuge dife Trè byen Klas 2, 75 oswa mwens Moule Brown 85℃
Kalite E Epoksidik Ekselan rezistans korozyon ak rezistan dife Ekselan Klas 1, 25 oswa mwens Pultruded Koulè Sur 180℃

Koulè SurDapre diferan anviwònman ak aplikasyon, chwazi rezin diferan, nou menm tou nou te ka bay kèk konsèy!

Ki baze sou aplikasyon yo, li ka adapte yo ak anviwònman aplikasyon yo:

G16
G8

•Toutes pyeton •Platfòm •Pwoteksyon Pwoteksyon

•Etaj ki monte •Eskalye •Trasesman chimik

• Manje ak bwason • Marin • Lwil ak gaz

•Pouvwa •Faktori •Konstriksyon

•Pharmaceutical •Metal & min •Pulp & papye

•Rekreyasyon •Pak dlo •Telekominikasyon

•Fèm sèvè IT •Sant anbakman •Enstalasyon transpò

•Dlo ak tretman dechè •Lojman machin

9

Pati nan ekspozisyon griyaj FRP moule:

IMG_4443
IMG_4441
IMG_4502
IMG_4457
IMG_4484
IMG_4497
IMG_4693
IMG_4493
IMG_4712
IMG_4675
  • Previous:
  • Pwochen:

    • Seleksyon pwodwi

    Tanpri ranpli fòm ki anba a pou kòmanse pale ak pwochen ajan ki disponib la.

    PWODWI ki gen rapò:

    Frape antre pou fè rechèch oswa ESC pou fèmen